LabWiki

Parent Article


Article Functions


Lab Questions/Comments


Lab Updates


Search the Wiki


More


Optical Spectroscopy in Ruby and Hyd

An introduction to several types of experimentation, Raman scattering, fluorescence, and transmission/reflection spectroscopy using a grating spectrometer is provided through these experiments. The grating spectrometer is useful from the hard ultraviolet (~ 100 nm) to the far infrared (~ 1 mm), spanning a range of order 104 in frequency or wavelength. A modern revolution for measurement has come about with the introduction of diode arrays or CCD (charge coupled device) detectors. In this case, an array of “photodiodes” or photosensitive pixels is placed in the focal plane of the spectrometer and exposed. Each pixel can have the sensitivity to detect only a few photons per second. The advantage is the high sensitivity and the rapid readout mitigated by computer driven electronics, so that a strong spectrum can be recorded in a few milliseconds, while a weak spectrum can be integrated up for long periods of time (hours) before read-out. In this experiment we use a CCD with 1024 pixels in the horizontal plane, i.e. the plane in which the radiation is dispersed.

Schematic of Silvera experiment

Optical setup for studying ruby fluorescence.

Photograph of Silvera experiment

Optical spectroscopy is a major tool both in research and industry for characterizing materials, and has grown in use with the development of cooled state-of-the-art CCD detectors and grating spectrometers. CCDs have greatly increased the sensitivity and speed of measurements and discovery in modern research studies of gases, liquids, and solids. This experiment not only provides experience in various types of optical spectroscopy, but one also learns the advantages and limitations of modern optical detectors.