Search the Wiki
The Franck-Hertz experiment, one of the oldest to convincingly demonstrate quantized energy levels, has long been a staple of the undergraduate laboratory. In the experiment with mercury, the anode current as a function of accelerating voltage displays a familiar periodic peak and valley structure with the peak spacing roughly equal to the energy of the first exited state. However, much has been learned about the interactions of electrons and atoms since 1914, and it is known that this physics is much more complex (and interesting) than is usually discussed at the introductory level.
In this immersion, participants will revisit the Franck-Hertz experiment, in setups that use both mercury vapor and neon gas. We will review the basic ideas and then extend the studies along two lines. The first extension uses a recent AJP paper by Rapior, Sengstock and Baev (2006) who propose a simplified model of electron-atom interactions to explain the changing peak separation in the anode current as the accelerating voltage increases. The second extension adds a lock-in amplifier plus modulating voltage to the accelerating voltage which allows the experimenter to plot the derivative of the anode current signal as a function of accelerating voltage. This trick reveals hidden structure in the anode current curve, and makes possible measurements of higher energy excitations, which become more prominent in the Hg experiment as the temperature (and thus Hg vapor pressure) is reduced, allowing some electrons to gain more energy between inelastic collisions.
Our apparatus consists of two independent Franck-Hertz tubes, one with mercury (mounted inside an oven) and the other with neon gas, which are connected to a ramp generator and chart recorder via simple switchboxes that allow a quick change of apparatus. In addition a lock-in amplifier can be patched in to the setup to add a modulation voltage on top of the sweep voltage and the lock-in then measures the derivative of the anode current signal. The Franck-Hertz tubes, current amplifiers and lock-in are commercial products. The ramp generator and interconnecting boxes are home built. In the picture below, the chart recorder is not shown.
Although the Franck-Hertz experiment is over 100 years old, the physics it explores—the interaction of energetic electrons and atoms—remains a topic of active research, for example, in the design and characterization of “drift tube” detectors used in high-energy physics. By digging deeper into the physics this old standby, the instructor can help students appreciate some of the subtleties of the concepts of mean-free path and elastic and inelastic cross sections, plus have them learn about a truly useful tool: the lock-in amplifier.
Acquired Skills: How to carry out basic current spectroscopy with different Franck-hertz tubes; how to deduce the energy of the excited states in a basic way; how to interpret details of the anode-current plots based on a model of inelastic scattering and electron energetics; how to operate a lock-in amplifier and optimize its settings; how to investigate higher energy Hg states using a lock-in and varying temperature.
Outline of the Immersion:
All essential materials and equipment will be provided, but participants are encouraged to bring a camera (cellphone OK) and computer/notebook to record notes and results. If the participant has a favorite data analysis package, that will be useful during the lab.
Safety considerations: none.
Cost estimate: Each Frank-Hertz setup consists of a Frank-Hertz tube (either Hg or Ne), with a power supply that delivers filament current, bias voltages, and at least one must supply a ramp voltage, typically up to 70 volts (for Ne). Also necessary are an x-y recording device, such as a chart recorder, a (preferably digital) oscilloscope, or computer-interface capable of recording voltages up to 100V. Finally, a lock-in amplifier is required to study the higher-energy states of Hg. Although commercial units, such as the SRS830 are optimal, one can make a low-frequency lock-in with a much cheaper computer interface and software that is quite adequate. The following list provides a rough guide to the major costs.
brought to you by the AAPT, APS and NSF-NSDL
a member of the comPADRE Digital Library
©2007-2017, All Rights Reserved
contact Advanced Labs
|about - disclaimer - terms - privacy - faq - sitemap|