Editor selections by Topic and Unit

The Physics Front is a free service provided by the AAPT in partnership with the NSF/NSDL.

## Conceptual Physics:Kinematics: The Physics of Motion Units

This topic contains a selection of units designed to assist you in teaching motion. Units include frames of reference, graphing skills, motion in one dimension, motion in more than one dimension, vectors, and more. Units are not listed in a prescribed order.

### Frames of Reference (5)

#### Lesson Plans:

This lesson plan is linked to text material on reference frames, aberration of light, and a  short introduction to the foundations of special relativity.

Item Type: Lesson Plan
Level: HS Physics/Astronomy
Duration: One Class Period

#### Activities:

This animation illustrates the concept of relative motion by depicting a moving boat traveling with the river current. An observer walks onshore. You can view the motion from the reference frame of the boat, the river, or the ground and watch how the motion appears differently. Don't miss the accompanying worksheet.

Item Type: Interactive Simulation
Level: Grades 8-12
Duration: 30 minutes

This animation takes the fear out of reference frames, and it's fun. All motion is relative to a frame of reference. This resource shows how the motion of a bouncing basketball looks different depending on whether the observer is standing still, walking in the same direction as the player, or walking in the opposite direction. It offers students nine scenarios (frames of reference), and they must answer questions from the observer's viewpoint.

Item Type: Interactive Simulation
Level: Grades 6-12
Duration: 30 minutes

#### References and Collections:

An "Illumination" is a short chunk of explanatory/exploratory material that addresses a specific topic, usually from a conceptual point of view. These Illuminations contain simulations and were designed primarily for student self-study and practice.

Item Type: Multimedia Tutorials
Level: High School

#### Student Tutorials:

When you study motion in one dimension (motion along a straight line) a good place to begin is with motion diagrams. These tutorials contain a number of interactive motion diagrams for the student.

Item Type: Interactive Tutorial
Level: Grades 9-12
Duration: 30-40 minutes

### Graphing (22)

#### Lesson Plans:

An excellent lesson plan developed specifically to accompany the PhET simulation "The Moving Man".  Students with little prior knowledge of graph interpretation will gain understanding of velocity vs. time graphs and how they differ from position vs. time. Adaptable for both middle school and high school.

Item Type: Lesson Plan
Level: Grades 8-12
Duration: One class period

This is a PhET Gold Star winning lesson that helps students build skills in interpreting graphs of motion.  It accompanies the PhET simulation "The Moving Man" (see link below) and includes classroom-ready Power Point concept questions, student guide, and assessments.

Item Type: Teaching Module
Level: Grades 8-12
Duration: 2 Class Periods

High school students can often record data and "plug & chug", but have more difficulty in fitting or interpreting data.  This exemplary two-week unit on data analysis introduces students to the statistical method known as least squares regression.  Using an online tool to plot data, students then calculate regression lines and fit the data to estimated parameters.

Item Type: Instructional Unit
Level: Grades 9-12
Duration: Two Weeks

Students will apply knowledge of motion by making their own animated sequences that model real-life physical situations.  Sound a little zany?  Topics include motion in an inertial reference frame, gravity on a falling body, and orbital motion of planets.  Fun and creative!

Item Type: Project-Based Learning
Level: Grades 6-12
Duration: 3-4 Class Periods

This lesson plan from The Science House features toy trucks and motion detectors to explore motion graphing and its terminology. There are no calculations required. EDITOR'S NOTE: This lesson calls for LoggerPro or similar data analysis software, plus motion sensors. Costs can run \$200-400, but site licenses typically cover all computers at a school building.

Item Type: Lesson Plan
Level: Grades 7-12
Duration: 1-2 Class Periods

#### Activities:

With one mouse click, students may create their own customized graphs from among five types: bar, line, area, pie, and X/Y.  Various patterns, colors, grids, and label choices allow for customization, with a full tutorial to help in set-up. This resource is cost-free.

Item Type: Graph-Making Tool
Level: Grades 4-12

This website contains a collection of short videos depicting physical processes commonly discussed in beginning courses.  Positions of objects in the video frame can be viewed in step motion or real-time, and then mapped onto video analysis software, allowing for more accurate measurement and graphing.

Item Type: Video Collection
Level: Grades 9-12

This set of eleven interactive challenges will help students master motion graphing. Each challenge requires the student to match the motion of an animated car to the correct position/time or velocity/time graph. The activity provides enough repetition to help learners construct a meaningful understanding of why the graphs appear as they do.

Item Type: Interactive Problem Set
Level: Grades 9-12
Duration: 30-40 minutes

This activity blends a motion sensor lab with digital graph modeling. Students use the online graph-sketching tool to predict graphs of distance vs. time and velocity vs. time. Next, they use a motion sensor to collect data on a real toy being pushed up a ramp. Last, they analyze differences between their predictions and the actual data. Highly recommended by the editors. For beginners, try first introducing the activity directly above.

Item Type: Blended Lab and Modeling
Level: Grades 6-9
Duration: 1-2 Class Periods

Maneuver a simulated man and watch simultaneous graphs of his position, velocity, and acceleration.  For beginning learners, the acceleration graph may be closed.  Try teaming this simulation with the great companion lessons by PhET teacher-fellows, found under "Lesson Plans" above. Highly versatile resource; adaptable to a broad spectrum of abilities/levels.

Item Type: Interactive Simulation
Level: Grades 6-12
Duration: One Class Period

This interactive graphing activity explores the effects of gravity on light and heavy objects. It gives learners a means to make predictions, quickly compare their predictions with real data, and analyze why the predictions were right or wrong. It's one of the few resources we've seen in which universal gravitation, constant acceleration, slope of the line, and graphing of free-fall motion can all be meaningfully explored in one class period. Includes lesson plan & assessment w/answer key.

Item Type: Digital Model
Level: Grades 6-12
Duration: One Class Period

#### References and Collections:

This set of lessons investigates the language of kinematics (the physics of motion).  It is designed to help students understand that the scientific meaning of words like "velocity" and "acceleration" is different from their use in everyday language.

Item Type: Interactive Tutorial
Level: Grades 8-12
Duration: 20 minutes

#### Content Support For Teachers:

A very well-organized tutorial on how to construct and interpret three basic kinematic graphs:  P/T, V/T and A/T.  It includes animated examples, links to five worksheets, and related problems for student exploration.

Item Type: Online Tutorial
Level: Grades 8-12
Duration: One Class Period

#### Student Tutorials:

This is a web-based homework problem that helps students understand velocity vs. time graphs (v vs. t).  A sequence of user-activated questions guides beginners through a full conceptual analysis before introducing the math.  Based on PER principles (physics education research).

Item Type: Interactive Problem
Level: High School Physics
Duration: 30 minutes

Excellent self-guided tutorial promotes understanding of "position" as a physics concept.  Contains multiple graphs, animations, and interactive opportunities for students to test their comprehension.

Item Type: Interactive Tutorial
Level: Grades 8-12
Duration: One Class Period

A companion to the resource above, this online tutorial explores the importance of the slope of v-t graphs as a representation of an object's acceleration.  Self-guided evaluations help students overcome common misconceptions.

Item Type: Interactive Tutorial
Level: High School Physics
Duration: 45 minutes

Unique approach based on a prediction model of learning. Students predict the appearance of distance and velocity graphs for different types of walking motion, then verify their predictions with a motion sensor. If all members of the group predict correctly, they move to the next problem. If not, the group's task is to analyze the error to see what went wrong, then write statements to modify incorrect ideas.

Item Type: Motion Lab/Modeling
Level: 9-12
Duration: Two Class Periods

#### Assessment:

A set of homework problems (with answers) written by the PhET team to accompany "The Moving Man" simulation.  It assesses student understanding of graphs of position, velocity, and acceleration.

Item Type: Problem Set
Level: High School
Duration: One Class Period

This printable two-page worksheet/assessment gauges student understanding of position vs. time graphs.  It was developed by the Modeling Instruction project team.

Item Type: Problem Set
Level: High School
Duration: 45 minutes

A great follow-up for the position vs. time worksheet above, this assessment asks students to create and interpret v-t graphs when given the motion of an object in a p-t framework.

Item Type: Problem Set
Level: High School
Duration: 45 minutes

An assessment designed by the award-winning Modeling Instruction team.  It assesses a student's ability to create and also interpret motion maps, p-t graphs, and v-t graphs.  Could be used either as a class review or as a unit test.  Downloadable in pdf format.

Item Type: Assessment
Level: Grades 8-12
Duration: One Class Period

An assessment in the form of a question that asks students to identify which objects are accelerating, when shown a set of four strobe diagrams.  A2L materials are designed to reveal what students do NOT know and build a basis for formative assessment.

Item Type: Formative Assessment
Level: Grades 7-12
Duration: 10 minutes

### Vectors (20)

#### Lesson Plans:

This two-day lesson is built around a pair of online games that let beginners investigate single-vector and dual-vector systems.  Includes post-lesson assessments with answers provided. NOTE: Requires Flash plug-in. (Developed by National Council for Teachers of Mathematics)

Item Type: Teaching Module
Level: Grades 8-12
Duration: Two Class Periods

A unique and highly engaging two-week unit on vectors.  Beginning physics students build understanding of vector properties by doing real pilot navigation training.  This problem-based learning module comes with complete guides for teacher and learner.  The final assessment is a virtual pilot test flight.  Cost-free with teacher registration

Item Type: Instructional Unit
Level: High School
Duration: Two Weeks

This is an exemplary set of Power Point materials for teachers to introduce vector basics, including vector addition/subtraction and how to calculate vector components.  See Assessments below for a companion unit test.  All may be freely downloaded.  To read about the underlying pedagogy employed by the authors, go to Reference Material below and click on Bridging the Vector Calculus Gap.

Item Type: Power Point Presentation
Level: High School Physics
Duration: 1-2 Class Periods

#### Activities:

Students explore several kinematics situations involving different starting positions and speed.  Velocity and acceleration vectors are displayed in real-time graphs as the action is animated. Requires Java plug-in.

Item Type: Interactive Simulation
Level: High School
Duration: 30 minutes

This Java applet gives a visual representation of the addition of vectors.  Students can choose to add 2-5 arbitrary vectors.  The applet adds the vectors visually, moving each to the sum of the previous vectors.

Item Type: Interactive Simulation
Level: High School Physics
Duration: 30 minutes

Any vector directed in two dimensions can be thought of as having two parts (components).  This Java applet, developed by a high school teacher, demonstrates how to find the magnitude of these components.  The component vectors can be in any directions relative to the given vector or relative to each other.

Item Type: Interactive Simulation
Level: High School Physics
Duration: 30-40 minutes

It can be difficult for beginning students to understand what a vector represents.  This fun simulation allows them to watch vectors change as they drive a virtual car.  Speed vs. Time is also displayed in a real-time companion graph.

Item Type: Scaffolded Simulation
Level: Grades 7-10
Duration: 30 minutes

If students are to perform calculations relating to dynamic torque and magnetic forces, they need a firm understanding of vector cross products.  This Java simulation lets them observe the cross product from different vantage points as they spin the plane on which A and B lie.

Item Type: Interactive Simulation
Level: High School Physics
Duration: 30 minutes

Want to give your students a chance to explore vector addition without tackling the math? This simple Java simulation lets them draw two vectors by clicking and dragging the cursor. The components, magnitude, and direction will be displayed; then click "Add" to see the vector sum.

Item Type: Interactive Simulation
Level: High School
Duration: 30-45 minutes

This very simple simulation can help beginners understand what vector arrows represent. It was designed by the PhET team to target specific areas of difficulty in student understanding of vectors. Learners can move a ball with the mouse or let the simulation control the ball in four modes of motion (two types of linear, simple harmonic, and circular). Two vectors are displayed -- one green and one blue. Which color represents velocity and which acceleration?

Item Type: Interactive Simulation
Level: Grades 6-12
Duration: 20-30 minutes

#### Content Support For Teachers:

The primary goal of the Kinematics Graphing Project is to investigate the ability of students to interpret kinematics graphs and to generate a set of suggestions for faculty teaching the subject.

Item Type: Research
Level: Teacher Support

This award-winning web tutorial is a great choice for the crossover teacher who wants a refresher on vectors and their properties.  Included is an introduction to free-body diagrams, example problems, a series of self-paced questions, and related interactive simulations.

Item Type: Interactive Tutorial
Level: Teacher Support

#### Student Tutorials:

This tutorial, part of the respected Physics Classroom web site, is an Editors' Top Choice.  It  discusses fundamentals and operations of vectors, plus in-depth support in understanding vector addition and resolution.  Entertaining animations and images accompany the text.

Item Type: Interactive Tutorial
Level: High School
Duration: 45 minutes

This Java applet walks students step-by-step through the process of tip-to-tail vector addition.  The accompanying text is easy for high school students to follow.

Item Type: Simulation-based Tutorial
Level: High School
Duration: 30 minutes

After students have mastered addition of two vectors, let them practice adding three vectors.  They will drag and draw the vectors, then attempt to draw the resultant.  If they are incorrect, the accurate resultant is drawn for them.

Item Type: Simulation-Based Tutorial
Level: High School Physics
Duration: One Class Period

This simple, yet effective Java-based tutorial uses geometric overlays to demonstrate why the Pythagorean Theorem works.  Background text helps students understand its importance in vector algebra.

Item Type: Simulation-based Tutorial
Level: Grades 8-12
Duration: 30 minutes

This page is an interactive environment where subjects are organized in flow charts, allowing easy movement from one topic to a related item. Vector resolution, addition, and product are covered in-depth.

Item Type: Online Tutorial
Level: Grades 9-12
Duration: 30 minutes

As instructors, we may forget that certain representations (like vector arrows) seem like a foreign language to beginning students. This thoughtfully-crafted tutorial introduces vector diagrams in kid-friendly language and extends the learning to interactive practice problems with answers provided.

Item Type: Digital Tutorial
Level: Grades 8-12
Duration: One Class Period

#### Assessment:

This online interactive problem was developed by a physics professor to give students guided practice in subtracting vectors.  Immediate feedback is given for both correct and incorrect responses.

Item Type: Interactive Problem
Level: High School Physics
Duration: 20 minutes

This comprehensive worksheet on vectors may be used as a test/quiz for beginning physics students.  It was designed to accompany the lecture and lesson materials by the same authors (see above under Lesson Plans).  May be freely downloaded and printed for classroom use.

Item Type: Assessment/Test
Level: High School Physics
Duration: One Class Period

### Motion in One Dimension (11)

#### Activities:

This Java animation shows the motion of an object moving with constant acceleration. Ghost images can be displayed, with controls available to pause, step, and rewind.  Try teaming this applet with the one below on constant velocity. The students' task: calculate the acceleration of the ball.

Item Type: Interactive Animation
Level: Grades 9-12
Duration: 30 minutes

This simple animation depicting constant linear velocity would be great teamed with the applet directly above.  The two applets can help beginning students learn how to read motion diagrams and differentiate velocity from acceleration.

Item Type: Interactive Animation
Level: Grades 9-12
Duration: 30 minutes

A simulation to explore the motion of a model car with constant acceleration. The student sets values for initial position, velocity and acceleration -- the simulation creates the real-time graphs.  A pair of timers can be placed anywhere along the path of the car to measure the motion at intervals. Can be adapted for grades 6-7 by using only the velocity and position fields.

Item Type: Interactive Simulation
Level: Grades 6-12
Duration: 30 minutes

A very effective problem-based activity to help students understand the universal law of gravitation. They work cooperatively on a mock space mission: a spacecraft is orbiting Iris, a planet with a smaller radius and lower mass than Earth. Students collaborate to find the gravitational acceleration on the surface of Iris and figure out how a human body will react to gravity on the planet.

Item Type: Problem-Based Learning
Level: Grades 11-12
Duration: One Class Period

This interactive graphing activity explores the effects of gravity on light and heavy objects. It gives learners a means to make predictions, quickly compare their predictions with real data, and analyze why the predictions were right or wrong. It's one of the few resources we've seen in which universal gravitation, constant acceleration, slope of the line, and graphing of free-fall motion can all be meaningfully explored in one class period. Includes lesson plan & assessment w/answer key.

Item Type: Digital Model
Level: Grades 6-12
Duration: One Class Period

How does air resistance affect the motion of a free-falling object? In this model, a blue ball falls under the influence of gravity alone. The red ball is subject to both gravity and air resistance. Adjust the amount of air resistance with a slider, then watch the changes in the motion graphs.

Item Type: Interactive Simulation
Level: Grades 9-12
Duration: 30 minutes

#### References and Collections:

This tutorial focuses on the language, principles, and laws which describe and explain the motion of objects. It is part of The Physics Classroom website, and provides links to related labs, problem sets, help for struggling learners, and curriculum support.

Item Type: Interactive Tutorial
Level: High School

#### Content Support For Teachers:

This item, part of an online textbook, offers in-depth content support for teachers, plus sets of problems related to speed and velocity.  It includes creative ideas for classroom investigations that integrate statistics.

Item Type: Reference Material
Level: Teacher Support

This resource offers support in understanding the concept of acceleration as a rate of change. It includes example problems with solutions, homework problems, and a fun section that provides sample accelerations of selected events. Great content support for middle school teachers or solid tutorial for high school physics.

Item Type: Online Tutorial
Level: Tchr Support & HS Physics

This page offers a clear explanation of the equations that can be used to describe the motion of an object in a straight line.  A comprehensive set of algebraic, statistical, and conceptual problems are included. Provides content support for middle school teachers.....also appropriate for high school physics students.

Item Type: Online Tutorial
Level: Grades 9-12

#### Student Tutorials:

This is a web-based homework problem that helps students understand velocity vs. time graphs (v vs. t).  A sequence of user-activated questions guides beginners through a full conceptual analysis before introducing the math.  Based on PER principles (physics education research).

Item Type: Interactive Problem
Level: High School Physics
Duration: 30 minutes

### Motion in More Than One Dimension (11)

#### Lesson Plans:

This project-based unit explores 2-dimensional motion equations and applies them to the real world phenomena of projectiles.  Students build small-scale catapults to investigate the scenario of delivering supplies to a group of hikers stuck across a deep river gorge. Computer modeling techniques are introduced, with extensive support for both teacher and learner. Individual lessons may be pulled out if time is limited.

Item Type: Instructional Unit
Level: Grades 9-12
Duration: Two Weeks

Students learn about projectile motion and conservation of momentum as they investigate a mock-murder case involving a handgun.  They are given just enough data about the gun ballistics and the crime scene to test hypotheses and solve the murder.  This resource is based on the PBL (Problem-Based Learning) instructional method.  It includes a Teacher's Guide and a Student Manual.

Item Type: Problem-Based Learning
Level: High School Physics
Duration: Two Class Periods

An excellent two-day lesson to accompany the PhET simulation Projectile Motion (see Activities below). It was crafted by educators to provide robust support to both teachers and learners on projectile motion with and without air resistance. You will find scripted teacher discussion, explanations of fluid properties of air, and modifiable worksheets. Created for middle school, but can be easily adapted to Physics First or Physics Prep courses.

Item Type: Lesson Plan
Level: Grades 6-9
Duration: Two Class Periods

#### Activities:

Students can have fun exploring projectile motion as they interactively fire objects of varying mass from a cannon.  Users may set initial velocity, angle, and air resistance.  This resource would be teamed well with the Physics Classroom student tutorial on projectile motion (below).

Item Type: Interactive Simulation
Level: Grades 6-12
Duration: One Class Period

This simulation would be a good follow-up to the PhET projectile motion applet (above).  This item takes the learner to the next level by calculating maximum height, horizontal distance, magnitude of velocity, and total energy of a projected object.  Students will set initial height, speed, angle, and mass before firing their projectile. Appropriate for high school or gifted/talented middle school students.

Item Type: Interactive Simulation
Level: Grades 8-12
Duration: 45 minutes

A great activity for getting students excited about projectile motion.....and easily adaptable for the high school classroom. It is a CSI scenario where a man is shot with a handgun. Using the Problem-Based Learning method, students work cooperatively to solve the case by applying physics. This resource includes a printable student manual.  Registered teacher-users can also access an Instructor's Guide free of cost.

Item Type: Problem-Based Learning
Level: High School Physics
Duration: Two Class Periods

19 videotaped experiments are organized sequentially here for introducing fundamentals of motion in introductory physics classes. The instructional method is based on cognitive apprenticeship: students focus on the process of science by observing, finding patterns, modeling, testing, and revising. The author is a highly-respected professor of physics, who has done extensive work in physics education research.

This simulation features an airplane flying at constant horizontal velocity, preparing to drop relief supplies to a small island.  As captain of the plain, you must calculate the release point for dropping the package and press the red release button at the right moment. The trajectory of the falling package is traced onscreen. If your calculations were off, it will dump in the ocean. Question for students to ponder: what does inertia have to do with it?

Item Type: Interactive Simulation
Level: Grades 9-12
Duration: 20-30 minutes

#### Content Support For Teachers:

This easy-to-follow tutorial helps students comprehend how various components work together to determine trajectory:  range, height, time, speed, and angle.  It includes explanations of algebra-based equations related to projectile motion.

Item Type: Reference Material
Level: Teacher Support

#### Student Tutorials:

This seven-part resource is an excellent introduction to the characteristics of projectile motion.  Through in-depth explanations and animations, it explores vertical acceleration and explains why there are no horizontal forces acting upon projectiles, a common student misconception.  The last two sections are devoted to problem solving.  Try teaming it with the PhET Projectile Motion activity above.

Item Type: Interactive Tutorial
Level: Grades 8-12
Duration: 45 minutes

A unique and highly-engaging tutorial developed by the authors of Australia's PhysClips.  Short film clips, photos, and diagrams are integrated with simple text to spark interest.  The first two videos feature the classic "Hammer and Feather Drop", both on the moon and on Earth.....a great springboard to discuss air resistance.

Item Type: Multimedia Tutorial
Level: High School
Duration: 1-2 Class Periods

### Circular Motion (9)

#### Activities:

This set of activities developed by the Exploratorium offers students an entertaining way to see real-world applications of rotational dynamics and principles of circular motion.  They will explore forces at work in "The Ollie" and torque forces required for mid-air maneuvers.

Item Type: Classroom Activity Set
Level: Grades 9-12

This Java simulation illustrates both conservation of energy and circular motion. A roller coaster travels over a large and small hill, then goes through a loop. Students can have fun controlling speed, height of the hills, and size of the loop, then viewing the effect on the moving car.  An engaging way for beginners to explore the physics governing roller coaster construction. No mathematics is introduced.

Item Type: Interactive Simulation
Level: Grades 6-12
Duration: 20 minutes

For the teacher planning a unit on amusement park physics, this tutorial can double as a student classroom activity.  It offers an overview of the forces acting upon a roller coaster as it travels on a straight, curved, or looped track. Free body diagrams and animations depicting kinetic/potential energy also enhance student understanding of a complex set of interactions. (Includes a self-test.)

Item Type: Interactive Tutorial
Level: Grades 8-12
Duration: One Class Period

11 videotaped experiments are organized sequentially here for teaching circular motion in introductory physics classes. The instructional method is based on cognitive apprenticeship: students focus on the process of science by observing, finding patterns, modeling, testing, and revising. The author is a highly-respected professor of physics, who has done extensive work in physics education research.

Item Type: Learning Cycle
Level: High School
Duration: Multi-Day Unit

Can an amusement park Merry-Go-Round be designed to be dangerous? This simple model lets kids discover for themselves how rotational speed and radial distance interact to create a more thrilling ride. Don't miss the page link to "Physiological impact of G-forces". Setting the speed & radial distance at the highest points will result in g-forces that exceed space shuttle re-entry and high speed fighter jets! We suggest using this simulation to introduce rotational quantities and angular velocity.

Item Type: Interactive Simulation
Level: Grades 9-12

This interactive simulation offers a way for students to explore the connection between uniform circular motion and simple harmonic motion. It provides a way to visualize SHM as the projection of uniform circular motion onto one axis, which should promote understanding of the basic equation for objects undergoing simple harmonic motion.

Item Type: Interactive Model
Level: High School Physics
Duration: One Class Period

#### Content Support For Teachers:

One of the most deeply entrenched misconceptions among beginning physics students is that centrifugal motion (away from the center) is a "force" in itself.   In this tutorial, part of Physics Classroom, the author explains why the direction of force is viewed from an inertial frame of reference in a classical mechanics course and thus why centrifugal motion is not a force in a Newtonian framework.

Item Type: Interactive Tutorial
Level: Grades 8-12

#### Student Tutorials:

This resource guides the beginning student through characteristics of circular motion.  It is broken into five sections addressing:  the mechanics of circular motion, centripetal force,  algebraic and trigonometric problems and solutions, and a full chapter that debunks the centrifugal "force" misconception.  Interactive problems feature liberal use of diagrams and force vectors to enhance understanding.

Item Type: Interactive Tutorial
Level: High School
Duration: 60-90 minutes

This student tutorial illustrates how circular motion principles can be combined with Newton's Second Law to analyze physical situations.   Two algebraic problems and detailed solutions are provided, plus a five-step model for solving circular motion problems.

Item Type: Interactive Tutorial
Level: Grades 9-12
Duration: 45 minutes

### Planetary Motion (4)

#### Activities:

HyperPhysics is an exploration environment for concepts in physics which employs concept maps and other linking strategies to facilitate smooth navigation. In exploring any aspect of physics, basic concept understanding is a must. Connections between concepts a plus.

Item Type: Reference Material
Level: High School

Explore Kepler's Laws in this simulation that allows students to control the size and path of the orbiting object. Don't miss the "About" link to supporting resources: student manuals, assessment materials, and more.

Item Type: Interactive Simulation
Level: High School
Duration: 30-45 minutes

With this orbit simulator, you can set initial positions, velocities, and masses of 2, 3, or 4 bodies, and then watch them orbit each other. The simulation is especially effective at helping students understand how distance and mass are related to orbit. Scroll down on the page for related lesson plans developed by middle school and high school teachers.

Item Type: Interactive Simulation
Level: Grades 7-12
Duration: One class period

#### Content Support For Teachers:

This set of materials pertaining to Kepler's laws includes equations and properties of conic sections, scale of the solar system, the energy equation for Keplerian motion, and Newton's "Universal Gravitation". It is part of a larger collection that offers lesson plans, lecture materials, and historical background.  No calculus is introduced.

Item Type: Historical Reference
Level: High School

### Special Collections (8)

#### Lesson Plans:

This page contains procedures for setting up 20 demonstrations relating to motion.   All demos have been fully tested in the classroom and were selected for inclusion because they are engaging, require minimal set-up, and are highly illustrative of key concepts taught in introductory classical mechanics.  Historical anecdotes and commentary add to the depth of this unique resource.

Item Type: Demonstration
Level: Grades 6-12
Duration: 10-20 minutes each

This 8-day instructional unit for middle school integrates engineering practice into a study of the energy of motion. Through investigations of waterwheels, roller coasters, bouncing balls, and a pendulum, students get a solid introduction to energy transformation in a mechanical system. The unit also introduces static and kinetic friction, drag, elastic/inelastic collision, and students learn to calculate frictional force. Don't have time to do the full unit? Lessons can be pulled out individually.

Item Type: Instructional Unit
Level: Grades 6-8
Duration: 8-10 Class Periods

#### Activities:

19 videotaped experiments are organized sequentially here for introducing fundamentals of motion in introductory physics classes. The instructional method is based on cognitive apprenticeship: students focus on the process of science by observing, finding patterns, modeling, testing, and revising. The author is a highly-respected professor of physics, who has done extensive work in physics education research.

Item Type: Learning Cycle
Level: High School
Duration: Multi-Day Unit

This free collection will impress teachers in the way it promotes depth of understanding about graphs. Learners use interactive digital tools to predict how a motion graph will look, then they watch as the computer simulates process in real time. Next, they place inputs on the graphs and use language to explain what is happening. Finally, they compare their own predictions with the simulated process to analyze why the graphs appear as they do. As with all Concord Consortium materials, the resources are subjected to rigorous classroom testing to ensure their effectiveness.

Item Type: Interactive Tutorials
Level: Grades 6-12

An exceptional resource collection on how to integrate "direct measurement videos". These high-speed short videos feature tools for easy analysis of various physical situations:  rulers, grids, frame-counters, and screen overlays for making precise measurements. Includes 9 teaching modules with lesson plans, assessments and answer keys, and pedagogical background. Does not require purchase or installation of video analysis software.

Item Type: Video Analysis Lessons
Level: Grades 9-12

#### References and Collections:

This website contains a collection of short videos (20-40 frames each) depicting physical processes commonly discussed in beginning courses.  Positions of objects in the video frame can be viewed in step motion or real-time, and then mapped onto video analysis software, allowing for more accurate measurement and graphing.

Item Type: Video Collection
Level: Grades 9-12

This collection of short videos explores the basic physics of football in a way that's sure to spark interest among kids. Each video features an NFL player, file footage of games, slow-motion video captured with a super high-speed Phantom Cam. Physicists appear in each video to explain the concepts and clarify the connection to physics. Topics: Newton's Laws, momentum, inertia, vectors, center of mass, projectile motion, and more.

Item Type: Video Collection
Level: Grades 7-12

#### Student Tutorials:

This is an interactive website designed and maintained by a high school physics teacher.  It offers tutorials, simulations, and problems relating to kinematics, waves, trigonometry, algebra, and geometry.  The entertaining format is designed for students and also contains an EZ Graph calculator to help them easily see the graphic effect of changing coefficients.

Item Type: Physics Collection
Level: High School

### Velocity and Acceleration (5)

#### Activities:

This versatile simulation lets students explore the effects of braking on an object moving with constant velocity. Set the initial velocity, start the applet, and hit the brakes. Graphs of velocity vs. time and position vs. time are simultaneously displayed. You can also set the rate of braking acceleration. This resource will help students build concepts relating to frictional force.

Item Type: Interactive Simulation
Level: Grades 8-12
Duration: 30 minutes

This robust activity from Concord Consortium lets kids deeply explore the meaning behind the slopes of velocity/time and position/time graphs. It blends interactive graph sketching, data analysis, and digital Q&A as learners explore the motion of an animated car. It will help students understand why motion graphs appear as they do, rather than mimic the pathway of an object's motion.

Item Type: Digital Model
Level: Grades 6-10
Duration: One Class Period

This activity blends a motion sensor lab with digital SmartGraph software to help learners see how the slope of a P/T graph can be used to find velocity. Scaffolding is provided at intervals to help with calculations. Requires a Vernier Go! motion sensing device.

Item Type: Motion Lab/Modeling
Level: Grades 6-10
Duration: One Class Period

This interactive graphing activity explores the effects of gravity on light and heavy objects. It gives learners a means to make predictions, quickly compare their predictions with real data, and analyze why the predictions were right or wrong. It's one of the few resources we've seen in which universal gravitation, constant acceleration, slope of the line, and graphing of free-fall motion can all be meaningfully explored in one class period. Includes lesson plan & assessment w/answer key.

Item Type: Digital Model
Level: Grades 6-12
Duration: One Class Period

#### References and Collections:

In this study, students in an inquiry-based classroom were videotaped to detect how they made sense of concepts relating to force and motion. The analysis revealed that focused "sense-making activities", free-body diagrams, energy diagrams, and related real-world activities produced deeper student understanding. Free download

Item Type: Research Article
Level: Teacher Support

### Assessments (5)

#### Assessment:

An assessment designed by the award-winning Modeling Instruction team. It assesses a student's ability to create and also interpret motion maps. p-t graphs, and v-t graphs. Could be used either as a class review or as a unit test. Downloadable in pdf.

Item Type: Assessment/Test
Level: High School
Duration: One Class Period

This printable two-page worksheet gauges student understanding of position vs. time graphs. It was developed by the Modeling Instruction project team.

Item Type: Problem Set/Homework
Level: High School
Duration: 30-45 minutes

A great follow-up for the "Position vs. Time Worksheet" above, this assessment asks students to create and interpret v-t graphs when given the motion of an object in a p-t framework.

Item Type: Problem Set/Homework
Level: High School
Duration: 30-45 minutes

This comprehensive worksheet may be used as a test-quiz for introductory physics or as a diagnostic assessment for more advanced courses. It was designed to accompany the lecture and lesson materials by the same authors (see above under Vectors: Lesson Plans). May be freely downloaded and printed for classroom use.

Item Type: Assessment/Problem Set
Level: High School
Duration: One Class Period

This comprehensive self-assessment offers much more than a set of problems. For each of the 37 questions, links are provided to additional explanations. This resource is ideal for self-assessment or as guided practice for learners who are struggling.

Item Type: Self Assessment
Level: Grades 9-12
Duration: 45-60 minutes

### Modeling Motion (4)

#### Activities:

This simulation is a powerful way to investigate the meaning of shape/slope for 3 types of motion graphs: p-t, v-t, and a-t. Students "match" the motion of a ball whose movement is automatically generated. To do it correctly requires analysis of the motion. Next, learners predict what the graphs will look like by using sliders to generate their own straight-line graphs.

Item Type: Interactive Model
Level: Grades 9-12
Duration: One Class Period

In this model, a ball is launched by a spring-gun in a building with a very high ceiling. The task: calculate an initial velocity so that the ball barely touches the 80-foot ceiling. Students can test their answers by setting the initial velocity on the simulation, then watch the ball's path. Graphs of position vs. time or velocity vs. time can be turned on to view the ball's motion as a function of time.

Item Type: Digital Model
Level: Grades 10-12
Duration: 30 minutes

We like the simplicity of this model for introducing free fall and gravitational acceleration. Students can control the initial height, set initial velocity from -20 to 20 m/s and change the gravitational constant. The free fall is displayed as a motion diagram, while graphs are simultaneously displayed showing position, velocity, and acceleration vs. time.

Item Type: Digital Model
Level: Grades 8-12
Duration: One Class Period

Student modeling provides a great opportunity for kids to test and apply their own prototypes to explain and predict physical phenomena. This model includes explicit step-by-step directions for building the computer model with Easy Java Simulations, a program that greatly reduces the amount of programming required. It asks students to develop a computer model for a ball moving vertically under the influence of gravity. Editor's Note: The activity requires that students have first collected data of a basketball or volleyball bouncing under a motion detector.

Item Type: Computer Modeling
Level: Grades 9-12
Duration: One Class Period

### The Case of Roller Coasters (4)

#### Lesson Plans:

Roller coasters offer an inherently interesting way to study energy transformation in a system. This simulation lets students choose from 5 track configurations or create their own design, then watch the resulting motion. Energy bar graphs are simultaneously displayed as the coaster runs its course. Students can adjust the initial speed and friction, or switch to stepped motion to see exact points where kinetic and potential energy reach maximum and minimum levels. Includes lesson plan and student guide.

Item Type: Simulation-Based Lesson
Level: Grades 6-10
Duration: One Class Period

A four-day lesson that explores the same physics concepts as roller coaster design, but breaks the learning into two distinct segments to ensure that beginners understand the basics. In Part I, kids build a very simple curved track to explore kinetic and potential energy for a gumball moving downhill. Part II becomes more complex: build and test a gumball machine with loops and specific design constraints.

Item Type: Instructional Module
Level: Grades 7-10
Duration: 4-5 class periods

#### Activities:

This short video does a great job of demonstrating centripetal force and how it acts to keep objects moving along a curved path. What makes a rider on a roller coaster feel a sensation of being thrown outward from the center during a loop, although there is no outward net force? The video serves to help beginners understand the dynamics of circular motion.

Item Type: Video Clip
Level: Grades 7-12
Duration: 5 minutes

Exactly what IS centripetal force and what does it do? An astronaut on board the International Space Station demonstrates this force in ways students cannot observe in daily life. The environment is "almost" weightless, making it easy to observe the center-seeking motion without the complicating effects of gravity.

Item Type: Video Clip
Level: Grades 6-12
Duration: 5 minutes