Visit the
Molecular Expressions Website

Galleria
Photo Gallery
Silicon Zoo
Chip Shots
Screen Savers
Museum
Web Resources
Primer
Java Microscopy
Win Wallpaper
Mac Wallpaper
Publications
Custom Photos
Image Use
Contact Us
Search
Home

Polarization of Light

Natural sunlight and most forms of artificial illumination transmit light waves whose electric field vectors vibrate equally in all planes perpendicular to the direction of propagation. When their electric field vectors are restricted to a single plane by filtration, however, then the light is polarized with respect to the direction of propagation.

The basic concept of polarization is illustrated above in Figure 1. In this example, the electric field vectors of the incident light are vibrating perpendicular to the direction of propagation in an equal distribution of all planes before encountering the first polarizer, a filter containing long-chain polymer molecules that are oriented in a single direction. Only the incident light that is vibrating parallel to the polarization direction is allowed to continue propagating unimpeded. Therefore, since Polarizer 1 is oriented vertically, it only permits the vertical waves in the incident beam to pass. However, the waves that pass through Polarizer 1 are subsequently blocked by Polarizer 2 because it is oriented horizontally and absorbs all of the waves that reach it due to their vertical orientation. The act of using two polarizers oriented at right angles with respect to each other is commonly termed crossed polarization and is fundamental to the practice of polarized light microscopy.

Interactive Java Tutorial
Polarization of Light
Rotate polarizers to explore their effect on an incident beam of light. 

Even unpolarized incident light, such as natural sunlight, is polarized to a certain degree when it is reflected from an insulating surface like water or a highway. In such cases, the electric field vectors of light parallel to the insulating surface are reflected to a greater degree than vectors with different orientations. However, the optical properties of the surface primarily determine how much of the reflected light is polarized. For instance, the properties of mirrors make them very poor polarizers, while many transparent materials are excellent polarizers if the angle of incident light is within certain limits. The particular angle inducing maximum polarization is known as the Brewster angle and is expressed by the equation:

n = sinq(i)/sinq(r) = sinq(i)/sinq(90-i) = tanq(i)

where n is the refractive index of the medium, q(i) is the angle of incidence, and q(r) is the angle of refraction. When incident light is polarized in this way, it is often referred to as glare. On unusually bright days, the glare caused by sunlight on a roadway or a field of snow, may be almost blinding to the human eye.

Interactive Java Tutorial
Brewster Angle
Examine the polarization effect on a beam of light reflected at the Brewster Angle. 

The hazard of driving, or performing other daily activities, with a large amount of glare in one's eyes has resulted in the development of polarized sunglasses. The lenses of such sunglasses contain polarizing filters that are oriented vertically with respect to the frames. Below, Figure 2 demonstrates how polarized sunglasses eliminate the glare from the surface of a highway. As illustrated, the electric field vectors of the blue light waves are oriented in the same direction as the polarizing lenses and, therefore, are passed through. In contrast, the red light wave represents glare, which is parallel to the surface of the highway. Since the red wave is perpendicular to the filters in the lenses, it is successfully blocked by the lenses.

Another interesting use of light polarization is the liquid crystal display (LCD) utilized in applications such as wristwatches, computer screens, timers, and clocks. These devices are based upon the interaction of rod-like liquid crystalline molecules with an electric field and polarized light waves. The liquid crystalline phase exists in a ground state that is termed cholesteric, in which the molecules are oriented in layers and each successive layer is slightly twisted, forming a spiral pattern. When a polarized light wave interacts with the liquid crystalline phase, the wave is twisted by an angle of approximately 90 degrees with respect to the incident wave. This angle is a function of the helical pitch of the cholesteric liquid crystalline phase, which is dependent upon the chemical composition of the molecules. However, the helical pitch may be fine-tuned if small changes are made to the molecules.

A prime example of the basic application of liquid crystals in display devices is the seven-segment LCD numerical display illustrated in Figure 3. Here, the liquid crystalline phase is sandwiched between two glass plates that have seven electrodes, which can be individually charged, attached to them. Although the electrodes appear black in this example, they are transparent to light in real devices. As demonstrated in Figure 3, light passing through Polarizer 1 is polarized in the vertical direction and, when no current is applied to the electrodes, the liquid crystalline phase induces a 90 degree twist of the light and it can pass through Polarizer 2, which is polarized horizontally. This light can then form one of the seven segments on the display.

When current is applied to the electrodes, however, the liquid crystalline phase aligns with the current and loses the cholesteric spiral pattern. Therefore, light passing through a charged electrode is not twisted and is blocked by Polarizer 2. By coordinating the voltage on the seven positive and negative electrodes, the display is capable of rendering the numbers 0 through 9. In this example, the upper right and lower left electrodes are charged and, consequently, block light from passing through them, which results in the formation of the number "2".

Polarization of light is also very useful in many aspects of optical microscopy. Microscopes may be configured to use crossed polarizers, in which case the first polarizer, described as the polarizer, is placed below the sample in the light path and the second polarizer, known as the analyzer, is placed above the sample, between the objective and the eyepieces. If the microscope stage is left empty, the analyzer blocks the light polarized by the polarizer and no light is visible. However, when a birefringent, or doubly refracting, sample is placed on the stage between the crossed polarizers, the microscopist can visualize various aspects of the sample. This is because the birefringent sample rotates the light, allowing it to successfully pass through the analyzer.

Contributing Authors

Mortimer Abramowitz - Olympus America, Inc., Two Corporate Center Drive., Melville, New York, 11747.

Shannon H. Neaves and Michael W. Davidson - National High Magnetic Field Laboratory, 1800 East Paul Dirac Dr., The Florida State University, Tallahassee, Florida, 32310.


BACK TO LIGHT AND COLOR

BACK TO POLARIZED LIGHT MICROSCOPY

Questions or comments? Send us an email.
© 1998-2022 by Michael W. Davidson and The Florida State University. All Rights Reserved. No images, graphics, scripts, or applets may be reproduced or used in any manner without permission from the copyright holders. Use of this website means you agree to all of the Legal Terms and Conditions set forth by the owners.
This website is maintained by our
Graphics & Web Programming Team
in collaboration with Optical Microscopy at the
National High Magnetic Field Laboratory.
Last modification: Friday, Nov 13, 2015 at 02:18 PM
Access Count Since March 10, 2003: 114425
Visit the websites of our partners in education: